50mm Aluminium composite partitioning is the most common partition used in office refurbishment. The system is versatile in its height and elevation, solid panels are constructed from honeycomb plasterboard and is finished in a wall vinyl, and any style of glazing is available, in single or double glazed options, half glazed or fully glazed as shown above, we can even incorporate your company logo onto the glass.
25mm venetian blinds are compatible with this system, either off set with single glazing or tilt controlled integral with the double glazed option.
Rounded corner posts and door frames add to an improved look and all visible aluminium components can be powder coated to any BS or RAL number to match your companies corporate image.
Various door veneers including standard sapele, ash and oak, hung in a wrap around aluminium door frame, vision panels are optional and can be slot, square or round if required. Door furniture can also vary to include round aluminium, or even coloured plastic door handles, digital locks or thumb turns can also be fitted.




  • Wall vinyl finish up to a class O spread of flame
  • Solid elevation achieves a 31dB
  • Single glazed elevation achieves a 27dB
  • Double glazed elevation achieves a 33dB
  • Up to 3657mm ( 12’0”.) height is attainable
  • Door and frames can be suitable for a 914mm wide disabled access opening, or alternatively double or hospital doors are also available.

Plasterboard & Metal Stud

The advantage of this partitioning system is its versatility to meet fire regulations, up to two hour fire resistance is easily achievable and different sized studs are used dependent upon the required height. Nominal metal stud widths are 50mm, 70mm and 146mm jumbo studs, which will achieve heights in excess of ten metres. Additional sound reduction is attainable by introducing an insulation within the partitioning void. Plasterboard joints can be either taped and jointed ready to receive a wall vinyl or emulsion, or alternatively aluminium clamp and cover can be fitted to vertical joints and powder coated to match corporate colours, skirting can be plastic, timber or concealed fix aluminium.
Windows and doors can be incorporated into the partitioning, aluminium sections for these are governed to the narrower width walls, but again can be powder coated, available in single or double glazed and integral venetian blinds if required. Door veneers, vision apertures and furniture are to any specification.



  • Wall vinyl finish up to a class O spread of flame
  • Sound reduction up to 52dB
  • Partition fire rating up to 2 hours, doors and windows fire rated up to 1 hour resistance
  • Heights in excess of 10m
  • Wall widths vary from 75mm up to 200mm jumbo walls
  • Doors and frames can be suitable for a 914mm disabled access opening, or alternatively double or hospital doors are available.


At Excel Interiors we are proud of the materials that we supply and install. Examples of our most popular systems are listed below.

Komfort Partitioning:
600 Series; Kameo 50; Kameo 75; Komfire 75 & 100; Klassic; Polar; Impression; Mirage

Basic Partitioning / CCF:
Relok/Excel; Firelok/Prima; Soundlok; Symphony; Symmetry; Clarity

Other Partitioning Systems:
Maars; Ceiling distribution; CP Supplies

Suspended Ceiling Systems:
Armstrong, OWA; Treetex; USG/Donn; Ecophon; Rockfon; SAS; Burgess; Metal Furring